Products
Phenolic Plywood

PRODUCT INFORMATION

PACIFIC PHENOLIC PLYWOOD is engineered to create a phenolic film overlay on smooth surfaces, which makes it tougher and more durable than any plywood of the same thickness. A phenolic film is applied and sealed to all four sides to make it resistant against surface wear and tear during the pouring of concrete. This results to cost savings, reduced deflection and a decreased weight for the formwork.

PACIFIC PHENOLIC PLYWOOD is an ideal material used for system formwork because of its high load-bearing capacity and its glossy, smooth and maintenance-free surface. 
PACIFIC PHENOLIC PLYWOOD meets International Standards under Certificates EN ISO 9001, EN ISO 14001, SMS 1003-1 (PEFC).

ADVANTAGES

REUSABLE 
Unlike ordinary concrete-forming panels, 

PACIFIC PHENOLIC PLYWOOD 
may be re-used for 20 or more times, with proper usage and handling. It provides efficiency with a cost-saving advantage. 

GLASS-SMOOTH FINISH PACIFIC PHENOLIC PLYWOOD
produces a smooth finish surface upon panel removal. This eliminates the need for plastering, making it immediately ready for painting. 

UNIFORM SURFACE PACIFIC PHENOLIC PLYWOOD 
has a phenolic film that reduces the difference between the old and new panels, giving you a consistently smooth, beautiful surface. 

EASY TO HANDLE PACIFIC PHENOLIC PLYWOOD
is durable and workable, allowing the plywood to be easily installed and stripped from the formwork, making work easier and reducing labor costs. 

REVERSIBLE PACIFIC PHENOLIC PLYWOOD
may be utilized on both sides to maximize its use. WORKABLE PACIFIC PHENOLIC PLYWOOD does not warp nor deform in proper storage. Its phenolic film makes it resistant against water and corrosion. Plywood can be sawn into different sizes to fit construction needs. Sealant needs to be applied to sawn parts. 

TIME-SAVING PACIFIC PHENOLIC PLYWOOD 
saves you 30% concrete-pouring time because it produces smooth surfaces.

Proper handling Tips

When cutting PACIFIC PHENOLIC PLYWOOD, make sure to re-seal the cut edges using sealant.
 
Clean PACIFIC PHENOLIC PLYWOOD surfaces after every use.

Always handle with care. Avoid dropping heavy, hard and sharp objects on the panels.

Available sizes:

· 12mm (1/2 x 4” x 8’)
· 18mm (3/4 x 4” x 8’)

Narra Plywood

  • A favorite among architects and designers for its aesthetic quality and its durability
  • Usually varnished to preserve its natural finish 
Available sizes:
· 2.5mm (1/8 x 4” x 8’)
· 5mm (1/4 x 4” x 8’) - used as cladding for walls and other surfaces for decorative purposes
· 10mm (1/2 x 4” x 8’)
· 18mm (3/4 x 4” x 8’) - used in cabinetworks, tables, counters, furniture, décor and other fixtures

Narra Plyboard

  • Used cabinetworks, tables, counters and other fixtures and furniture for decorative purposes 
Available size:
· 18mm (3/4 x 4” x 8’)

Lawanit

  • A low-cost alternative to ordinary plywood
  • Used for wall and ceiling cladding, cabinet/shelf backing 
Available sizes:
· 3.2mm (1/8 x 2” x 4’)
· 4.8mm (3/16 x 2” x 4’)
· 3.2mm (1/8 x 4” x 8’)
· 4.8mm (3/16 x 4” x 8’)

Ribbon Grain

  • A decorative plywood with long, fine grains
  • Ideal for interior applications
  • Usually varnished to preserve its natural finish
 Available size:
· 5mm (1/4x 4” x 8’)

Form Plywood

  • used as formworks for concrete building/forming 
Available sizes:
· 2mm & 2.5mm (3/4 x 4” x 8’)
· 4mm (3/16 x 4” x 8’)
· 5mm (1/4 x 4” x 8’)
· 9mm (3/8 x 4” x 8’)
· 10mm (1/2 x 4” x 8’)
· 18mm (3/4 x 4” x 8’)
 
 Hardiflex
  • A fiber cement board which is an alternative to ordinary plywood
  • Durable and resistant to moisture, fire and termites 
Available sizes:
·  4.5mm (1/4x 4” x 8’) - used for ceiling, walls and eaves in residential applications.
·   6mm (1/4 x 4” x 8’) - used for ceiling, walls and eaves in commercial applications
·   LITE 3.5mm (3/16 x 4” x 8’) – used for ceilings in residential applications .